Lets find out what you have on board!

[VertigoPerformance]

Myself, Stock 23cc with 29cc upgrade and X-Can

[Akela]

Soon to be 28.5cc reed ported with tgn race pipe

[mradlin]

T.S Headkit 28.5 cc and a DDM Dominator pipe!! Can you say "Woo Hoo??" LOL

[hal001]

28.5 headkit and dom pipe.

[VertigoPerformance]

How do you like the pipe?

[hal001]

The dom is the bomb, it has LOTS of power. Of course it helps with the 28.5, but it sure is a thirsty little piggy. More power more fuel. We have three baja's running and stock one is still half full, second has stocker with x-can , his is still 1/3 full, mine 28.5 with dom and elcon clutch. EMPTY. All running about same, lots of throttle. It hits hard. I like it. I got the chrome one.

[mradlin]

I'm really liking my Dominator Pipe also. Recently I tried out a TGN pipe, but went back to the Dominator pipe! I believe it to be a really well built pipe!

[fergus]

currently running a 29cc with either an x-can or my modifyed jetpro v1

in 2 weeks will be running a fully esp ported and modded ts reed case 26cc with tgn pipe (can i get a hell yea!!!?)

[TXTTom]

Zenoah 260 with 29ccm Kit and a Handmade Custom Pipe.

[Rex]

Zenoah G230RC uprated with new barings and seal + a DDM Race Ported 29cc cylinder kit(Stroker type, not 36mm)
Carb is a WT-257, on a Velocity Stack with Choke and a DDM Unifilter.
Pipe is the Samba Leopard edition.

[MadSenileBrian]

I just got the stock 23cc with a JP2. but I like it alot. I think my next motor is going to be the 27.2..

[VertigoPerformance]

Brian the CY 29cc Big-Bore Kit is killer for $90


http://www.davesmotors.com/store/media/ca484sk29cckit.jpg

My buggy rocks with this thing and the price can't be beat.

[Akela]

I would look into getting a race ported motor, worht the extra few bucks

[Agurak]

running a race ported zen 26 with modified stock exhaust. right in the middle of the power band, just right for me.

[too much]

I'm in the process of putting a 30.5 ESP in with HPI's pipe, 8000 rpm clutch!
I think I'll need new outdrives soon.

[VertigoPerformance]

You may need a new spring. The 8,000 makes low end control not as linear especially since the ESP offers more torque than RPM

I took my High Stall spring out and like it allot more.. A high stall spring is not very good for soft or loose surfaces.

[hrlaust]

I am running a race ported CY 26,9cc BB. I like the combination of high revs and a great torque :)

[Just_Gerald]

Baja #1 - Stock 23 with JP3
Baja #2 - ESP 30.5 Mod and Ported with Dom
Baja #3 - 29 Headkit with x-can, thinking of upgrading it to something else

[mradlin]

That's quite a list of baja's there Gerald!!

[VertigoPerformance]

Gerald, how many arms do you have??:p

[Just_Gerald]

yea it gets tricky, but man the fun you can have!!!
I have learned how to drive and steer with one hand (but that is for a completly different reason)









(videotaping)

[SavageKen]

I run a CY29. Stock can for exhaust Has well enough power. And I do not destroy my driveline.

Ken

[Carnivore]

Reed ported Oneill brothers 28.5, reed valve, walbro 813, Jetpro V3, high rpm clutch spring. Clutch is installed backwards.

Now I'm waiting for Elcon clutch.. :)

[hndaman1]

As of now I'am running the 28.5 top end kit, with a stock carb/airfilter, and a HPI racepipe...BUT I have an Oniels reedvalve kit comming from Mradlin too add on too my machine, and then maybe a 813 carb...:D after alittle port and polishin job....

[Jeremy1976]

I have the Zen 27.2 ESP with Walbro 813 carb and Dominator pipe. I also have the billet aluminum flywheel cover on it and the tall billet intake. Clutch setup I am running the stock Zen clutch now with a 8000 spring on it.

[Jeremy1976]

http://i39.photobucket.com/albums/e153/Jeremy1976/100_2099.jpg
http://i39.photobucket.com/albums/e153/Jeremy1976/100_2098.jpg
http://i39.photobucket.com/albums/e153/Jeremy1976/100_2135.jpg

[boarder4twnty]

I've had a few set ups in mine. Started with the stock 23cc and a Jetpro v3 then a ported 26.9cc with the Jetpro v3 then swithed to the TGN pipe, tried a TS reed case 27.2 with a Jetpro V3 but like a retard went to far when tunning it an lean siezed it. I'm now running a ported 28.5 with a stuffed crank and the GBE end bleed pipe and this is my favorite combo so far. The reed case has a ESP modded 28.5 top end comming for it to make it a ported 30.5cc, I plan to run my GBE pipe with it. I'm also working on a ported 27.2 with lightened piston and crank, at the rate I'm going it'll be done around mid Febuary. I also plan to pick up one of GBEs power plants when they become availible...

[cahonus66]

Boarder, let's see some pics.........:p :D

[Pro5thscaleDistributors]

We either run the Modelsport 23cc 2B and 4B version.
Here is some specs
http://www.pro5thscale.com/inc/sdetail/159

[Akela]

Can these Modelsport motors be tunned for off road running? I know I drooled over them (along with the Contrast line up of cars) a while back. Wish there was an onroad track near by (closer then TZR, the ferry ride just chews up all my money)

[navgander]

currently running a sikk 24.5 with a ds cooling head rd logics pipe with a medium x-port