noobish engine ???

[Accord_boy619]

Are head kit motors better? Why? etc whats the difference?:confused:

[Akela]

I run a head kit motor, I would say they are no better. Posibly even worse, the reason I say this is because there is more chance of something going wrong. But on the other hand if you want you can really play around with diffrent compression ratios. This is the reason I picked one up, even know I have yet to play around with diffrent ratios. I will still at some time be running this motor with alchol!

The TS head kits are better, ask ddm about these! Lots more money, but better built.

[VertigoPerformance]

What about the ONeill motors?

[Akela]

Lots of debate going on about head kit motors. With the heads being a 2 peace design there is a greater chance of developing a leak in them causing an overlly lean condition, or worst. I've never had this problem but have heard of others that have. Oneill head kit motors are the same as ddm's.

[Rex]

The top Tuners only mod standard engines, as they can safely be tuned to a higher degree than the Head kit engines.

But out of the box, the Head Kit engines produce a bit more power, than the standard Engines.

For the BLING effekt I like the Head kit, but as I want reliability as well, I run a Standard head, that has been race ported (DDM 29cc Race portet kit)

[Accord_boy619]

Hmm, I get it. thanx. Imlon @ this http://www.davesmotors.com/store/product1017.html but want it race ported. I want a 36mm bore w/ 28mm suffed crank.

[VertigoPerformance]

Whats the difference in the engine Accord boy posted and this one other than $10.00 and slightly more HP?
http://oneillbrothersracing.com/rccar/itemdescription/st29rc.htm


Does the goped engine have lots of torque and lower RPM?

[Akela]

Mlocker, these are 2 diffrent motors all together. the first is a 28.5 and the second is a 29. Oneill's sells the same motor with clutch and stuffed crank for the same price http://oneillbrothersracing.com/rccar/itemdescription/29blackstuffed.htm

For 80 bucks more you can get this same motor race ported

[Akela]

Accord boy, would you consider doing a big bore kit on your stock motor? Its alot cheaper. http://oneillbrothersracing.com/rccar/cylinders.htm
Look on this page there are many choices.

[VertigoPerformance]

I have the bigbore kit, $89.00 plus with the X Can and the buggy Rocks!

[Akela]

I think he is looking for a stock stroke engine (going for the rpms!) Oneills has the 28.5 top end kit for $75, then the same thing race ported for $105!

[mradlin]

I just put the TS headkit from DDM on my baja, and it's very nice!!!

[Accord_boy619]

I think he is looking for a stock stroke engine (going for the rpms!) Oneills has the 28.5 top end kit for $75, then the same thing race ported for $105!

Your right. But I also want a stuffed 28mm crank.
Will this fit a CY http://oneillbrothersracing.com/rccar/itemdescription/28cctopend_ported.htm

[Akela]

This topend kit should be a direct bolt in, I know with zenoah topend kits that you need diffrent bearings for them to work. And the stuffed crank sell for 55 bucks. Give them a call and find out what they can do for you.